*> >

INSTALLATION DATA
Installation	Indoor or Outdoor
Environment	Industrial, Marine
Amb. Temperature Min/Max	-25°C (CS) and -40°C (LTCS) , storage only / 60°C * *
OPERATING CONDITIONS
Fluids	Fuels (HFO, LFO, LSMGO, IFO), Mineral and Synthetic Oils, Hydraulic oil
Solid content	0% *
Viscosity range	between 1.2 and 5000 cSt * *
Speed	between 750 and 3600 rpm * *
Rotation (shaft view)	Clockwise Counter clockwise on request
TECHNICAL CHARACTERISTICS
Design available	STANDARD SEIM, ABS Type Approval, BV MODE II, RINA alternative testing
Flow rate	between 6 and 200 lpm (between 0.36 and 12 m3/h; between 1.6 and 52.9 GPM) * *
Suction pressure	between -0.5 and 10 barg (between -8 and 146 psi) *
Delivery pressure	16 barg (233 psi) MAX *
Operating temperature	between 0 and 150°C *
Seal	Mechanical
Bearing	Radial ball
Bearing lubrication	Self-lubricated
Drive	AC or DC motor
Construction shape	Horizontal or vertical
IN/OUT	Special versions
Safety valve	Internal recirculation
MATERIALS
Body/Flange	GGG40 *
Set of 3 screws	Nitrided carbon steel *
O-rings	Viton ®
Painting	On request
(*) For different values contact SEIM